Wessex STC-180 Collectors

STC-180 Sweeper Collector - STC-180 Flail Collector - STC-180 Scarifier Collector

The Wessex ProLine STC is semi-mounted to the tractor to allow the brush to follow the ground contours in work, and be lifted out of work for transport. As the whole machine is not lifted on the linkage, the STC can be operated behind a small tractor with limited lifting capacity.

The machine runs on its own four wheels, totally independent of the tractor. The front wheels are fully castoring and are re-positioned by a simple pin mechanism to adjust the working height, whilst the two rear wheels have flotation tyres to keep turf compaction to a minimum. Power is transmitted from the tractor through a heavy cast gearbox and belt drive to the rotor.

Sweeping & Collecting - When in sweeping mode, the ProLine STC is fitted with the brush rotor, comprising four banks of hard wearing polypropylene bristles which will lift autumn leaves, grass clippings and litter effortlessly into the hopper. The bristles, are a generous length to give a good 'flick' action, ensuring that the material is thrown to the back of the hopper.

When in scarifying mode, the flails blades are replaced with 2mm verti-cutting knives for a professional scarifying operation. Ideal for sports field work or lawns, the STC scarifier will leave a clean cut through the turf at approximately 30mm centres.

Key Features & Benefits –

  • Multifunctional – Use one machine for sweeping, scarifying and flail mowing.
  • All Year Round Maintenance Machine – Reduced capital outlay.
  • Large Capacity Hopper – For improved work rates.
  • Semi Mounted to the Tractor – High capacity machine on a small tractor, reduces running costs.
  • Hydraulic Tip – Ease of emptying.
  • Wide Turf Tyres – Minimal ground compaction.
  • Adjustable Drawbar – Ideal for various size tractors.
  • Runs on its Own Four Wheels – Follows ground contours accurately.
  • Simple Height Adjustment – Ease of operation.
  • Premium Powder-Coat Paint Finish – Maximum durability.

Specification –

All Models

  • Working width 1.8m
  • Overall width 2.2m
  • Hopper capacity 2.25m³
  • Weight (in sweeper mode) 635kg
  • Power required 25hp
  • Depot: All Outlets
  • Condition: New

Share It!

You may also like

Recently Viewed