Wessex AF Flail Mower 1.2M & 1.6M

The Wessex AF SERIES FLAIL MOWERS, in 1.2 and 1.6m working widths, have been developed to meet the needs of contractors, farmers and estate owners. They are well suited for controlling dense vegetation, i.e. brambles, bracken and long grass and for the maintenance of forestry and woodland areas.

The manual clutch and three high torque belts allows the Wessex AF flail mower to perform in arduous conditions without the inherent overheating problems associated with a centrifugal clutch.

Rear Wheel Option

Required if the machine is to cut close to fences and borders, or if the overall width is critical due to narrow access. The rear wheel option is available on the 1.2m version. In this configuration significant weight is transferred onto the drawbar, therefore the user must check the drawbar capacity of the towing vehicle. When fitted with rear wheels, the AF has a screw jack on the drawbar to aid connecting to the towing vehicle.

Flotation Tyres

Machines with side wheels also have the option of 22 x 11-8 flotation tyres as an alternative to the standard grass tyres. Ideal for working in boggy and low lying areas, the flotation tyres allow an ATV and a Wessex flail to operate in areas inaccessible to a tractor.

Key Features & Benefits -

  • 5mm Deck – Shot-blasted and powder coated for durability
  • Swivelling Ball Hitch – Satisfies Health and Safety recommendations
  • Turn Buckle On The Drawbar – Levels the machine for an even cut
  • Drawbar Can Be Offset To Either Side – Cut outside of the quad wheeling’s
  • Kill Switch Clips To The Rack Of The ATV – Emergency stop within easy reach of the operator
  • Screw Adjustor – Simple height adjustment
  • Powerful 18hp V-Twin Engine – Ample power for demanding applications
  • Manual Engagement Clutch – Efficient power transmission without overheating
  • Rear Anti-Scalp Roller – Eliminates scalping in rough conditions
  • Optional Heavy-Duty Flails
  • Y-Pattern Flails – Excellent mulching capabilities when cutting very long and dense vegetation
  • 3 High Torque Belts – Excellent power transmission
  • 16 X 8.50-8 Tyres As Standard Fitment – (22 x 11-8 flotation tyres as an option)
  • Front Rubber Flap – Eliminates projectiles being thrown out in front of the machine

Specification –

AF-120 -

  • Working width 1.2m
  • Overall width c/w side wheels 1.83m
  • Overall width c/w rear/4 wheels 1.46m
  • Cutting height range 10-160mm
  • Approximate weight c/w side wheels 280kg
  • No. flails (pairs) 32

AF-160 -

  • Working width 1.6m
  • Overall width c/w side wheels 2.23m
  • Overall width c/w rear/4 wheels 1.86m
  • Cutting height range 10-160mm
  • Approximate weight c/w side wheels 320kg
  • No. flails (pairs) 44
  • Depot: All Outlets
  • Condition: New

Share It!

You may also like

Recently Viewed